Samsung is constantly firing up Android 4.1.1/4.1.2 Jelly Bean firmware update to all its high-end smartphones and tablets. Galaxy S3, Note 2, and various variants of its Galaxy Tabs have already received or got the new update through Kies and Over-the-Air. The Android 4.1.1 Jelly Bean update has now been rolling out forย Samsung Galaxy Tab 2 7.0 WiFi GT-P3110 too. In fact, the OTA update started a while ago, but we have the complete firmware files and theyย includeย both forย brandedย and unbranded variants of theย Galaxy Tab 2 7.0 WiFi P3110.
If you have the received the update via Kies or software update feature on the device, you can still enjoy the taste of Jelly Bean by downloading the firmware file and installing it manually on your Tab. The procedure is very simple and requires very little effort. The firmware files provided here are officially for countries like the UK, Spain, Poland,ย Switzerland,ย Luxembourg,ย Romania (Cosmote),ย Slovenia, andย France. However, if you are from a country not listed above, you can choose any firmware except for Romania which is carrier-branded, and flash it.
Android 4.1.2 JB Firmware is Now Available forย Galaxy Tab 2 7.0 WiFi GT-P3110
Features of the Android 4.1.1 JB Update:
The Android 4.1.1 Jelly Bean update for theย Galaxy Tab 2 7.0ย P3110 brings a lot of new features and improvements to your device, Here are some of them.
- The new intuitive Google Now
- Project Butter: smoother and faster UI
- New enhanced TouchWiz
- Newย Notificationย Panel
- New Blocking Mode (found under Settings)
- 17 Apps in theย Multitaskingย Mini Bar in place of 10
- 5 layouts forย multitasking
- Changes in Settings interface
- YouTube client in Video Player
- Press the Power+Volume Up button together to start screen recording.
- Better battery life than ICS firmware.
- Many others.
Download Android 4.1.1 JB Firmware:
The following firmware are officially for a few European countries, but they can be flashed by Galaxy Tab 2 7.0ย P3110 users fromย Austria, Belgium, Germany, Hungary, Italy, and otherย countriesย too. Only the last one is for Cosmote users in Romania.
Install Android 4.1.1 JB Firmware Galaxy Tab P3110:
Follow the steps given below carefully to install the Jelly Bean firmware to yourย Galaxy Tab 2 7.0 P3110:
- Download the firmwareย from the link above and extract the zip. Inside the extracted folder, you will see a .tar.md5 file.ย
- Downloadย Odin3-v3.04.zipย and extract the zip.
- Downloadย Samsung USBย Driversย and install on your computer.
- Charge your device and backup all important data.
- Turn on USB Debugging on the device from Settings> Developer options>
- Switch off your phone and enter the Download Mode. To do this, ย press and hold the Volume Down +ย Power buttons simultaneously for a few seconds.
- Now open Odin.exe ย and connect your device to computer.
- When your device will be connected to your computer, one ID:COM box will turn green and you will “Added!!” text at the message box at Odin.
- Click on โPDAโ and select the firmware file withย .tar.md5ย extension from the firmware folder.
- Now in Odin, ensure that only the Auto Reboot and F. Reset Time options are checked
- Click onย Startย button on Odin.
- This installation might take a few minutes and when it finishes, you will see PASS! message on the ID:COM.
- The device will reboot now. Disconnect it from the computer.
Voila! you have successfully installed the Android 4.1.1 JB firmware on yourย Galaxy Tab 2 7.0 WiFi GT-P3110. Enjoy!
Sir? can i ask a Question? it is work galaxy tab 7.7????
No.
hey… does this solution still work??? i live in India and no jellybean update as yet.
btw, what about my apps… can i restore them after updating to jellybean???
Install the latest 4.1.2 firmware from here: http://droidviews.com/2013/install-android-4-1-2-jelly-bean-firmware-on-samsung-galaxy-tab-2-7-0-wifi-gt-p3110/
Backup your apps and other data using these apps first: https://www.droidviews.com/backup-apps-contacts-logs-messages-and-settings-without-rooting-your-android-phone/
I get this error message : All threads completed. (succeed 0 / failed 1)
Hi Jules,
You need to be sure that you are flashing the correct firmware. Check you model from Settings> About and try the compatible firmware. If you tab did not come with SIM support, it not have this feature vy a firmware update.
Thank You very much for this tutorial!
it is necesarry to install samsung mobile drivers.??because i have kies.
No need not then install the drivers but do not forget to close Kies while installing via Odin.
Hello? There’s no Ripple Lockscreen so you can scratch that in the updates section of this post ๐
Why no Ripple Lockscreen?! ๐
Downloaded the UK firmware! Little lag in opening the app drawer. Same when returning to home screen. It was my first time flashing my Tab! THANKS! ๐
Nice!
One problem. I do not have the Ripple Lockscreen. ๐
This update work on the GT-P3113.
Thanks
I remember a user flashed it on P3113 but he got a few issues. I would not recommend it to you. Currently there are no FW updates for the device.