It has been a 24 hour period since the JellyBean 4.2.2 update was On-The-Air for Galaxy Nexus, Nexus 4, Nexus 7 & Nexus 10. Also, we had clean and simple Instructions for Installation of JellyBean 4.2.2 OTA update on Nexus 4 and now we’ll do the same for the GSM Galaxy Nexus, including both Takju and Yakju variants.
You shall update either way by going to Settings > About Phone > Check Now for Update.ย But in case, you somehow aren’t able to update that way or you are certainly fond of manual flashing rather than automatic updates, then do bother to try this guide. Indulging very simple and few steps, which will directly drop your device to the latest 4.2.2 update.
Warning!
- The Instructions are meant only forย GSMย Galaxy Nexus Takju and Yakju variants
- Remember! Takju and Yakju are two different variants, so please do not cross over the files or steps
- Read and Understand the Instructions carefully before performing any actions
- DroidViews Community or any of its members are not responsible for any damage to your device
OTA Download Links:
Occam:ย OTA Link
Takju:ย OTA Link
Yakju:ย OTA Link
Nakasi:ย OTA Link
Nakasig:ย OTA Link
Mantaray:ย OTA Link
Toro:ย OTA Link
Prerequisites
- USB cable and USB drivers [LINK]
- Backup Device Storage, Text Messages, Contacts, Calender & Organizer
- Battery level above 60%
- Enable USB debugging. Go toย Settingsย >ย Developer Optionsย and enableย USB Debugging.
Installation Instructions
For Takju GSM Galaxy Nexus
- Download JellyBean 4.2.2 OTA update [Google Server link]
- Power off your device. Press Volume Up + Volume Down + Power buttons simultaneously until you see the fastboot screen. Use the volume keys to highlight Recovery and use Power button to select.
- You will see another screen with red colored exclamation mark. Press Volume Up and Power buttons altogether until you see the stock recovery screen.
- Select Apply update from ADB
- Connect your Galaxy Nexus to PC via USB data cable
- Open the folder where the OTA update package was downloaded. Press Shift Key and Right Click on an empty space, select Open Command Prompt Here.
- Flash the OTA package. Type:
adb sideload 472aafeb9fe3.signed-takju-JDQ39-from-JOP40D.472aafeb.zip
- When the update is Installed successfully, reboot the device.
For Yakju GSM Galaxy Nexus
- Download JellyBean 4.2.2 OTA update [Google Server link]
- Power off your device. Pressย Volume Up + Volume Down + Powerย buttons simultaneously until you see the fastboot screen. Use the volume keys to highlight Recovery and use Power button to select.
- You will see another screen with red colored exclamation mark. Pressย Volume Upย andย Powerย buttons altogether until you see the stock recovery screen.
- Selectย Apply update from ADB
- Connect your Galaxy Nexus to PC via USB data cable
- Open the folder where the OTA update package was downloaded. Pressย Shift Keyย andย Right Clickย on an empty space, selectย Open Command Prompt Here.
- Flash the OTA package. Type:
adb sideload 07501b11ad3b.signed-yakju-JDQ39-from-JOP40D.07501b11.zip
- When the update is Installed successfully, reboot the device.
Enjoy the latest JellyBean 4.2.2 update on your Takju and Yakju GSM Galaxy Nexus.
Tell us about your experience with this latest update. Give us your feedback and report if you are going through any bugs.
Join The Discussion: